PERIPHERAL INTERFACING

 Microprocessor based system design involves interfacing of the processor with one or more peripheral devices for the purpose of communication with various input and output devices connected to it. 

During the early days of the microprocessor revolution, these techniques required complex hardware consisting of Medium scale integration devices making the design highly complex and time consuming. So, the manufacturers (INTEL) have developed a large number of general and special purpose peripheral devices most of them being single chip circuits. 

They are also programmable devices. Hence these peripheral devices are found to be of tremendous use to a system designer.

Peripheral devices can broadly be classified into two categories.

(a) General purpose peripherals and

(b) Special purpose peripherals (Dedicated function peripherals)

General purpose peripheral devices that perform a task but may be used for interfacing a variety of I/O devices to microprocessor. The general purpose devices are given below:

Simple I/O -- (Non-programmable)

 Programmable peripheral Interface (PPI) – (8255)

 Programmable Interrupt Controller – (8259)

 Programmable DMA Controller – (8237/8257)

 Programmable Communication Interface – (8251)

 Programmable Interval Timer – (8253/8254)

Special function peripherals are devices that may be used for interfacing a microprocessor to a specific type of I/O device. These peripherals are more complex and therefore, relatively more expensive than general purpose peripherals. The special function peripherals (Dedicated function peripherals) are

Programmable CRT Controller

 Programmable Floppy Disc Controller

 Programmable Hard Disc Controller

 Programmable Keyboard and display interface.

The functioning of these devices varies depending on the type of I/O device they are controlling.

• "This Content Sponsored by Buymote Shopping app

  BuyMote E-Shopping Application is One of the Online Shopping App

  Now Available on Play Store & App Store (Buymote E-Shopping)

  Click Below Link and Install Application: https://buymote.shop/links/0f5993744a9213079a6b53e8

  Sponsor Content: #buymote #buymoteeshopping #buymoteonline #buymoteshopping #buymoteapplication" 

Microprocessor - I/O Interfacing Overview

 In microprocessors and microcontrollers, the Input-Output (I/O) Interfacing is a very important concept which acts as a communication medium between the processor, memory unit, and other peripheral devices. I/O interfacing is crucial for ensuring effective transfer of data and information between internal and external components of a computing system.

What is I/O Interfacing?

I/O interfacing, also referred to as input-output interfacing, is nothing but a way of enabling effective communication between the processor and the peripheral devices like memory, keyboard, mouse, etc.

I/O interfacing ensures smooth exchange of data and information among different components of the system. It optimizes the system operation by reducing the differences between data transfer speeds, formats, and operations between the processor and other devices.

Functions of I/O Interfaces

I/O interfacing in a microprocessor- or microcontroller-based system performs the following key functions −

• It provides synchronization between the operational speeds of the processing unit and the peripheral devices.
• It allows for selecting an appropriate device for processing input or output signals.
• It also generates control and timing signals.
• It makes use of the data bus to enable data buffering.
• It also identifies errors during exchange of data.
• It also allows for converting serial data into parallel and vice-versa, or digital data into analog signals and vice-versa.

This structure comprises several components which are explained below in detail −

• Data Bus Buffer − This component of the I/O interfacing unit allows bidirectional communication between the processor and the internal system bus. It enables exchange of data, control words, and status information.
• RD/WR Control Logic − It is the Read/Write Control Logic block that generates control signals for operation of various system components. It is responsible for directing the flow of data between the processor and the I/O devices. This block determines the direction of data transfer as follows −
  • In read mode, it directs the data flow from input-output devices to the processor.
  • In write mode, it directs the data flow from the processor to the input-output devices.
• Port A and B − These ports are interfacing points for connecting input-output devices with the internal system bus. Each of these two ports has a bidirectional buffer for smooth exchange of data.
• Control and Status Register − These components hold control signals from the processor and use them to determine the status of the port, data transfer, and errors.

Addressing in I/O Interfacing

The processor uses the address bus for selecting the interfacing unit. For this purpose, two least significant lines of the address bus namely, A0 and A1 are used as the select lines S0 and S1 respectively. These two select lines are used for selecting any of the four interfacing registers namely, port A, port B, control register, or status register.

The selection of a specific interfacing unit is done as per the following criteria −

Read State

Chip Select	Operation		Select Lines		Selected I/O Interface
CS	Read (RD)	Write (WR)	S0	S1
0	0	1	0	0	Port A
0	0	1	0	1	Port B
0	0	1	1	0	Control Register
0	0	1	1	1	Status Register

Write State

Chip Select	Operation		Select Lines		Selected I/O Interface
CS	Read (RD)	Write (WR)	S0	S1
0	1	0	0	0	Port A
0	1	0	0	1	Port B
0	1	0	1	0	Control Register
0	1	0	1	1	Status Register

Lets understand this selection of interfacing unit with the help of an example.

• For S0 S1 = 0 1, the Port B data register is selected for exchange of data between the processor and the I/O devices.
• For S0 S1 = 1 0, the control register is selected to store the control information produced by the processor.

Applications of I/O Interfacing

The following are some key applications of input-output interfacing –

• I/O interfacing allows different peripheral devices to connect to a microprocessor or a microcontroller or a computing system.
• It also allows for efficient file access without any information related to structure of the files.
• I/O interfacing also plays an important role in data acquisition and processing.
• I/O interfacing is used in industrial control system to connect processors with sensors and control devices.
• I/O interfacing is employed in multimedia systems to handle input and output audio and video signals.
• In network communication systems, I/O interfacing is used to manage data packets, routing, processing, encryption, and decryption.
• I/O interfacing also allows peripheral devices to connect or disconnect to a microprocessor or a microcontroller without affecting the operation of other components.

• "This Content Sponsored by Buymote Shopping app

  BuyMote E-Shopping Application is One of the Online Shopping App

  Now Available on Play Store & App Store (Buymote E-Shopping)

  Click Below Link and Install Application: https://buymote.shop/links/0f5993744a9213079a6b53e8

  Sponsor Content: #buymote #buymoteeshopping #buymoteonline #buymoteshopping #buymoteapplication" 

8051 Microcontroller Pin Diagram and Pin Description

 

8051 Microcontroller Pin Diagram and Pin Description

The document summarizes the key features and pin functions of the 8051 microcontroller. It has 40 pins total, with 32 pins used as I/O across four 8-bit ports (P0, P1, P2, P3). Many pins have multiple functions, such as serving as address lines when accessing external memory but as port pins otherwise. The remaining pins include power (VCC, GND) and oscillator (XTAL1, XTAL2) connections as well as pins for reset (RST), program store enable (PSEN), address latch enable (ALE), and external access (EA).

• Pins 1 to 8 − These pins are known as Port 1. This port doesnt serve any other functions. It is internally pulled up, bi-directional I/O port.

• Pin 9 − It is a RESET pin, which is used to reset the microcontroller to its initial values.

• Pins 10 to 17 − These pins are known as Port 3. This port serves some functions like interrupts, timer input, control signals, serial communication signals RxD and TxD, etc.

• Pins 18 & 19 − These pins are used for interfacing an external crystal to get the system clock.

• Pin 20 − This pin provides the power supply to the circuit.

• Pins 21 to 28 − These pins are known as Port 2. It serves as I/O port. Higher order address bus signals are also multiplexed using this port.

• Pin 29 − This is PSEN pin which stands for Program Store Enable. It is used to read a signal from the external program memory.

• Pin 30 − This is EA pin which stands for External Access input. It is used to enable/disable the external memory interfacing.

• Pin 31 − This is ALE pin which stands for Address Latch Enable. It is used to demultiplex the address-data signal of port.

• Pins 32 to 39 − These pins are known as Port 0. It serves as I/O port. Lower order address and data bus signals are multiplexed using this port.

• Pin 40 − This pin is used to provide power supply to the circuit.

8051 microcontrollers have 4 I/O ports each of 8-bit, which can be configured as input or output. Hence, total 32 input/output pins allow the microcontroller to be connected with the peripheral devices. 

Input Configuration 

If any pin of this port is configured as an input, then it acts as if it “floats”, i.e. the input has unlimited input resistance and in-determined potential.

Output Configuration 

When the pin is configured as an output, then it acts as an “open drain”. By applying logic 0 to a port bit, the appropriate pin will be connected to ground (0V), and applying logic 1, the external output will keep on “floating”. In order to apply logic 1 (5V) on this output pin, it is necessary to build an external pullup resistor.

"This Content Sponsored by Buymote Shopping app

BuyMote E-Shopping Application is One of the Online Shopping App

Now Available on Play Store & App Store (Buymote E-Shopping)

Click Below Link and Install Application: https://buymote.shop/links/0f5993744a9213079a6b53e8

Sponsor Content: #buymote #buymoteeshopping #buymoteonline #buymoteshopping #buymoteapplication"